Toyota Motor Europe Confirms Plan to Fix Accelerator Pedals on Recalled Vehicles in Europe

February 01, 2010
• Rigorously tested reinforced pedals will eliminate the excess friction that may cause sticking
• Toyota will make concerted effort to repair recalled vehicles as quickly as possible
Toyota Motor Europe today confirmed a comprehensive fix for the accelerator pedals of the 8 Toyota models planned for recall in Europe. Toyota’s engineers have developed and rigorously tested a solution that involves reinforcing the pedal assembly to eliminate the potential risk of excess friction that could, in rare instances, cause the pedal to stick. The first shipments of parts required for this fix will begin arriving in Europe next week. In parallel, plans to contact the affected customers are being put into place. In addition, Toyota has already implemented an effective production solution for vehicles to be sold in Europe.
"Toyota's policy is to put its customers first, in all circumstances", said Tadashi Arashima, President and CEO of Toyota Motor Europe. "We understand that the current situation is creating concerns, and we deeply regret it. We would also like to reassure customers: the potential accelerator pedal issue only occurs in very rare circumstances. The recall action is a precautionary measure aimed to guarantee the highest quality standards to all customers."
Arashima added: “At Toyota, we are fully committed to safety, we know what the problem is and how to fix it, so now our focus is to make that fix as quickly as possible. We will make the necessary checks to ensure future customers do not receive an affected vehicle”.
In the event that a driver experiences an accelerator pedal that sticks in a partial open throttle position or returns slowly to idle position, the vehicle can be controlled with firm and steady application of the brakes. The brakes should not be pumped repeatedly because it could deplete vacuum assist, requiring stronger brake pedal pressure. The vehicle should be driven to the nearest safe location, the engine shut off and a
Toyota retailer or road-side assistance should be contacted.
Toyota is not aware of any accidents resulting from this condition in Europe. Furthermore, there is no relation to the floor mat issue which was recently announced in North America.
The recall of 8 Toyota models in Europe was announced on January 28. The involved models and production periods are as follows:
• Certain AYGO (Feb 2005 – Aug 2009)
• Certain iQ (Nov 2008 – Nov 2009)
• Yaris (Nov 2005 – Sep 2009)
• Auris (Oct 2006 – 5 Jan 2010)
• Corolla (Oct 2006 – Dec 2009)
• Verso (Feb 2009 – 5 Jan 2010)
• Avensis (Nov 2008 – Dec 2009)
• Certain RAV4 (Nov 2005 – Nov 2009)
The precise number of involved units is still under investigation, but may reach up to 1.8 million vehicles. No Lexus models and no other Toyota models are affected.
Whilst this condition is rare Toyota advises customers who have concerns, to contact the Toyota Customer Service for assistance ahead of the formal recall instructions being issued.
How Toyota Will Fix Recalled Vehicles
Toyota has pinpointed the issue that could, on rare occasions, cause accelerator pedals in recalled vehicles to stick in a partially open position. The issue involves a friction device in the pedal designed to provide the proper “feel” by adding resistance and making the pedal steady and stable.  The device includes a shoe that rubs against an adjoining surface during normal pedal operation. Due to the materials used, wear and environmental conditions, these surfaces may, over time, begin to stick and release instead of operating smoothly. In some cases, friction could increase to a point that the pedal is slow to return to the idle position or, in rare cases, the pedal sticks, leaving the throttle partially open.
Toyota’s solution for current owners is both effective and simple. A precision-cut steel reinforcement bar will be installed into the assembly that will reduce the surface tension between the friction shoe and the adjoining surface. With this reinforcement in place, the excess friction that can cause the pedal to stick is eliminated.  The company has confirmed the effectiveness of the newly reinforced pedals through rigorous testing on pedal assemblies that had previously shown some tendency to stick.
Note to editors:
Toyota Motor Europe NV/SA (TME) oversees the wholesale sales and marketing of Toyota and Lexus vehicles, parts and accessories, and Toyota’s European manufacturing and engineering operations. Toyota directly and indirectly employs around 80,000 people in Europe and has invested over €7 billion since 1990. Toyota’s operations in Europe are supported by a network of 31 National Marketing and Sales Companies across 56 countries, a total of around 3,000 sales outlets, and nine manufacturing plants. In 2009, Toyota sold 882.000 Toyota and Lexus vehicles in Europe. For more information, visit

For more information, please contact Toyota Motor Europe:
Mr. Etienne Plas
T +32 2 745 2022
M + 32 479 99 96 13
Mrs. Maria Mack
T +32 2 745 2053
M + 32 478 90 40 72
Mrs. Anne Gaublomme
T +32 2 745 2041
M + 32 473 63 35 41
Toyota’s European Media Website:  

< back

You must be logged in to view this item.

This area is reserved for members of the news media. If you qualify, please update your user profile and check the box marked "Check here to register as an accredited member of the news media". Please include any notes in the "Supporting information for media credentials" box. We will notify you of your status via e-mail in one business day.

Copyright Notice

All materials on this site are for editorial use only. The use of these materials for advertising, marketing or any other commercial purpose is prohibited. They may be cropped but not otherwise modified. To download these materials, you must agree to abide by these terms.